Plugable USB 2.0 Bluetooth® Adapter

In part, because the higher speed of the USB 3.0 port (also known as USB 3.1 Gen 1 and USB 3.2 Gen 1) offers no advantage if the device itself is USB 2.0. For Plugable's USB 2.0 Bluetooth and Wi-Fi adapters, the performance is far below even the throughput of USB 2.0.

Also, the adapter itself is a USB 2.0 device and there is a critical issue that was overlooked in the design of USB 3.0 specifications. Many USB 3.0 ports leak broad-spectrum radio interference in the 2.4GHz to 2.5GHz range, which is the same radio band used by Bluetooth and Wi-Fi  

While this interference can be reduced through heavy shielding, it cannot be entirely avoided as it is inherent to the core design of USB 3.0. USB 2.0 ports do not have this issue. However, a USB 2.0 port that is in close proximity to an in-use USB 3.0 port may also be affected by radio noise leaked by it.

Components inside a tower-style computer case are largely exposed, and there is very little shielding to reduce the radio interference they produce. This is particularly true at the rear input/output panel of a PC. This is why cables that are designed to plug into the back of a computer often have a ferrite bead attached to them, to reduce radio interference. Also, the wireless signal weakens as it travels through the metal and plastic computer case and goes past the noise-producing components.

If you don’t have a port available on the front your PC, consider using a USB 2.0 hub to add ports located away from the back of your PC, or use a USB 2.0 extension cable to move the adapter to a location in line-of-sight with your receiving device.

The Bluetooth icon in the Windows system tray provides an easy way to connect and manage Bluetooth devices on your Windows 7, 8.x, or 10 computer, and many Bluetooth users rely on it. But an accidental click in the wrong place can cause you to lose that icon, leaving no obvious way to access Bluetooth settings. Here is how to restore it.

The Problem

When Bluetooth is activated in a Windows 7, 8.x, or 10 computer, Windows places a Bluetooth icon in the System Tray—the collection of easily accessible icons near the clock. It will either appear on the task bar or can be accessed by clicking the upward pointing triangle.

Clicking the Bluetooth icon displays a menu with entries for adding and managing Bluetooth devices. At the bottom of the menu, in a location that is easy to click by mistake, there is a 'Remove Icon' entry. This removes the icon and closes the menu with no notification or confirmation. The next time you go to use Bluetooth, the icon is unexpectedly gone. With no icon or other indication that Bluetooth is available, it is easy to assume that Bluetooth is broken or no longer exists on the computer. It is difficult to understand why Microsoft included this, since icons in the System Tray can be easily hidden using the 'Customize' link on the menu.

Although it is extremely easy to remove the icon by accident, Windows provides no easy way to restore it. Despite the importance of Bluetooth these days, especially to tablet users, Windows provides no Bluetooth control applet in the Control Panel. In Windows 8.x, a Bluetooth settings panel is available several levels deep from the Settings icon in the Charms menu, but like most Charms panels, its functionality is limited, and it includes no method to restore the Bluetooth icon.

Restoring the Icon

A detailed Bluetooth control applet does exist. Called Change Bluetooth Settings, it can be opened by searching for it in the Start menu. The procedure is slightly different in Windows 7 and in Windows 8.x/10, but once found, the icon is easy to restore.

Windows 7

1. Click the 'Start' button.
2. Type change Bluetooth settings in the 'Search Programs and Files' box directly above the Start button
3. 'Change Bluetooth Settings' should appear in a list of search results as you type. Click it to open the Bluetooth Settings window shown below.
   
4. Under the 'Options' tab, place a check in the box next to 'Show the Bluetooth icon in the notification area'
5. Click OK and restart Windows. The icon should reappear the next time you log in

Windows 8.x

1. Right-click the 'Start' Button
2. Select 'Search'
   
3. Making sure 'Everywhere' is selected, type change Bluetooth settings
4. 'Change Bluetooth Settings' should appear in a list of search results as you type. Click it to open the Bluetooth Settings window shown below
   
5. Under the 'Options' tab, place a check in the box next to 'Show the Bluetooth icon in the notification area'
6. Click 'OK' and restart Windows. The icon should reappear the next time you log in

Windows 10 (Creators Update and Later)

1. Click 'Start'
2. Click the 'Settings' gear icon
3. Click 'Devices'. This will open the 'Bluetooth & other devices' window
4. At the right of this window, click 'More Bluetooth Options'. This will open the 'Bluetooth Settings' window
5. Under the 'Options' tab, place a check in the box next to 'Show the Bluetooth icon in the notification area'
   
6. Click 'OK' and restart Windows. The icon should reappear the next time you log in

Windows 11

1. Click 'Start'
2. Click 'Settings'
   • You can also access Settings with the Windows Key + I shortcut
3. Click 'Bluetooth & devices'
4. Click 'Devices'
5. Scroll down, and click 'More Bluetooth settings'
6. Under the 'Options' tab, place a check in the box next to 'Show the Bluetooth icon in the notification area'
   
7. Click 'OK' and restart Windows. The icon should reappear the next time you log in

We hope this guide is useful! If you have any question, and if you are using a Plugable Bluetooth adapter, please reach out to us at support@plugable.com for assistance. If possible, please include your Amazon (or other retailer's) order ID and a PlugDebug log. We're happy to help!

Normally, Windows 10 will automatically install the 12.0.1.750 driver for the Plugable Bluetooth 4.0 USB Adapter. However, there have been some issues with the driver install process in the Windows 10 October 2020 Update (also know as the 20H2 or v2009 update).

First, it is recommended to try manually running Windows Update

1. Search the Start Menu for update
   • Alternatively, press Windows Key + I to open up the options, then search for update.
2. Click the 'Check for Updates' option
   
   
3. Click the 'Check for updates' button in the window that appears
   
   
4. You may need to click the 'View optional updates' link shown in this window to find the option for installing the adapter's driver.

If Windows Update Doesn't Work

If the driver does not install through this process, please try the steps below to manually install the 12.0.1.750 driver that is normally installed through Windows Update.

1. Download usb-bt4le-win10.zip and open it. It should open through Compressed Folder Tools, unless you have other decompression software installed
   • If you have a 32-bit (x86) version of Windows 10, please download usb-bt4le-win10_x86.zip instead.
2. You should see a folder in there called Broadcom 64 (or Broadcom 32). Drag that folder to your desktop and open it. This is to extract the files (you will encounter problems if you don't extract the files before continuing)
   
   
3. Inside the extracted folder on your desktop, you will find a lot of files, but near the top should be one named "bcbtums-win8x64-brcm.inf" (or bcbtums-win8x86-brcm.inf) Right-click on that one and select Install. If ".inf" doesn't show, use the one that says "setup information"
   
   
4. Click Yes on the User Account Control message. You should see a message that the operation completed successfully
   
   
5. Restart your PC with the adapter installed and then try using Bluetooth again, follow our pairing guide to connect your device

If there are still issues, please contact us for additional support.

There are a few reasons this could be happening, depending on the operating system used on your PC.

Windows

On all versions of Windows, it is important to make sure that the Bluetooth audio device is set as your active audio device for sound output/input. Be sure to check our guide on how to do that.

An issue that can occur on Windows 7, and earlier versions of Windows, is that many modern Bluetooth audio devices incorporate Bluetooth Low Energy (BLE) features from the Bluetooth 4.0 specifications. Unfortunately, Microsoft never implemented BLE support into versions of Windows prior to Windows 8.x.

Without support for BLE, earlier versions of Windows can get confused about how to handle BLE features on devices that have them. This can manifest in a variety of ways such as the PC showing that there are devices it cannot find drivers for, or it may simply appear that a device is connected but won't function. On Windows 7, this can be somewhat addressed by installing the 6.5.0.2000 driver version that we have available for download, rather than the one on the CD that comes with the adapter. This should at least correct issues with newer audio devices that have BLE features.

Linux

On Linux, the driver that provides support for Linux to use the Bluetooth radio in the adapter is baked into the kernel. However, there is more to Bluetooth than simply making the radio available.

Linux primarily uses two software libraries to support Bluetooth connections, BlueZ and Pulseaudio. BlueZ is the software layer that understands the various types of data that can be communicated over Bluetooth, such as mouse and keyboard input, controller input, audio, etc. BlueZ itself interfaces with Pulseaudio to provide audio playback and recording.

Unfortunately, the BlueZ and Pulseaudio open-source projects tend to introduce bugs on a regular basis that cause issues with certain devices. Given the added complexity of BlueZ interfacing with Pulseaudio for audio features, there tends to be more issues with Bluetooth audio in particular versus other types of Bluetooth hardware.

It is recommended to check the community forums for your Linux distro to see if there are other users experiencing audio issues on your current version. In addition, here are some other resources you can check for solutions to Bluetooth audio issues in Linux.

• https://wiki.archlinux.org/index.php/Bluetooth
• https://wiki.archlinux.org/index.php/Bluetooth_headset
• https://help.ubuntu.com/stable/ubuntu-help/bluetooth.html.en

In some cases, manually compiling BlueZ and manually updating Pulseaudio components can help. The instructions below were written for Ubuntu 16.x and 18.x, and should be adaptable to other Linux distros by using the appropriate package manager rather than apt.

Of course, beyond these issues with BlueZ and Pulseaudio, it is important to make sure that you've configured your Bluetooth audio device as the default audio device in your distro's sound settings, once pairing has been completed.

Connecting Bluetooth devices can be tricky!

While resolving thousands of Bluetooth issues here at Plugable, we’ve learned that the problem is often something going wrong in the pairing process. As we’ve helped customers with these issues, we’ve developed a step-by-step procedure that should work in any situation where a device isn’t pairing properly. We’ve also put together a database of pairing instructions for a wide range of Bluetooth audio devices.

There are multiple sets of instructions below for different versions of Windows. If you're having troubles connecting, try the instructions. If it fails at any point, contact us at support@plugable.com and tell us which step it failed on, and we’ll already have a good start on the troubleshooting process!

Choose Your Windows Version for Pairing Instructions

Comments, questions, or suggestions on improving this post? Let us know by contacting us for support.

Show Headphone/Speaker Pairing Instructions by Brand

Use the buttons below to toggle showing pairing instructions for brands beginning with that letter.

Compatibility with modern wireless game controllers is a complex topic. Almost every console controller requires some kind of third-party software to be fully, or even partially, functional via Bluetooth. Due to this, it is important to use the controllers exactly as described in this guide to get the expected results. It is also worth noting that the behavior of third-party software is difficult to trace since we did not design the software, so issues relating specifically to software mentioned in this article is limited.

In this article, you'll find details about how to connect:

• Xbox Wireless Controllers
  • Xbox One Controllers with Bluetooth
  • Xbox Series S|X Controllers
• Nintendo Controllers
  • Wii Remotes
  • Joy-Cons
  • Switch Pro Controllers
• PlayStation Controllers
  • Sixaxis/DualShock 3 (Mini USB Cable Required)
  • DualShock 4
  • DualSense
• 8BitDo Bluetooth Controllers and GBros Adapter

Note: Information about third-party software is only provided here for context. We do not officially recommend, support, or endorse these third-party software solutions. If you choose to use these software packages, you are doing so at your own risk.

This Google Sheet provides an at-a-glance view of what controller features are supported, along with notes about issues with particular controllers.

Understanding Different Controller Protocols

Microsoft introduced XInput in late 2005 as an update to DirectInput. Most PC games produced in the last decade or so have support for XInput. Support for DirectInput is mostly limited to older PC games. It is important to be aware of what protocol your controller is using, as it may cause compatibility issues with certain games or software.

Xbox controllers, since the Xbox 360 controller, have functioned over XInput. There are many other controllers, intended for use with a PC, also map their controls via XInput.

Most console controllers, other than Xbox-branded controllers, map their controls using DirectInput. This means that, even after establishing a connection, controllers intended for PlayStation and Nintendo consoles won't necessarily work with a PC without some additional software. Steam is typically the best choice for getting controllers working, but other options are available in most cases, though many of those alternatives are software that require a license fee to use.

Controller Support on Linux

Linux has extensive support for gamepads. However, it requires a great deal of manual configuration. Because of this lack of simplicity in configuring controllers, we do not recommend or provide support for using controllers on Linux.

Please see this article from the Arch Linux Wiki (ArchWiki) for details about manual configuration of various controllers.

Controller Support on Windows

Generally speaking, if you want to use a Nintendo or PlayStation controller on a PC, it is best to configure it using Steam. Valve has spent significant resources to easily remap controls to standard XInput controls. Even if you are using games from a store other than Steam, you can add it as a non-Steam game and utilize the built-in input mapper of Steam.

There are a number of reasons to use Steam for input mapping. For one, it is likely that the input mapper in Steam will continue to be supported in the long term. Additionally, Steam is focused on interpreting input data through standard Bluetooth interfaces in Windows, rather than overriding normal Windows Bluetooth profile support. This design makes it far less likely to cause conflicting issues with other Bluetooth devices.

Further instructions on controller remapping for Steam can be found here .

PlayStation Controllers

Since the introduction of the PlayStation 3, Sony has used a customized version of Bluetooth to connect controllers to their game consoles. The modifications that Sony uses are primarily to facilitate the way that PlayStation controllers pair with a console and the way they power on a console.

To connect a PlayStation 3 (Sixaxis/DualShock 3) controller to a PC, a USB cable is required to initially pair the controller to a PC. PlayStation 4 (DualShock 4) and PlayStation 5 (DualSense) controllers can pair without the use of a USB cable.

There have been third-party software packages that allow PlayStation controllers to connect, such as 'DS4Windows' and 'ScpToolkit', but these programs cause issues with other normal functions of Bluetooth adapters on PCs. Additionally, with regards to ScpToolkit, the creator of ScpToolkit explicitly notes that there are harmful versions of the software that are distributed with malware and that the software is obsolete , it absolutely should not be installed.

DualShock 3/Sixaxis

Users of these controllers should check the latest information on PCGamingWiki for details on how to use these controllers.

DualShock 4

One way to connect these controllers is to first install the PlayStation Now app—which includes drivers for the controller—and perform pairing of the controller using the instructions for the PlayStation Now app . Once that process is complete, you'll need to map controls using another application (such as Steam).

Sony notes that, when connected to a PC, the following features are not supported:

• Touchpad is not supported
• The color of the light bar cannot be changed
• Rumble, the motion sensor, and the headphone jack are not supported

DualSense

As of writing this article, the DualSense controller included with the PlayStation 5 connects wirelessly in an unknown fashion. It is assumed that it uses a modified Bluetooth implementation similar to the last two generations of controllers for PlayStation consoles.

Xbox Controllers

Xbox One/One S/Elite/Series

Note: The original launch version of the Xbox One controller does not have Bluetooth built-in. Make sure that you are using a later revision of the controller that does have Bluetooth. Images detailing the physical differences between both versions can be found in this article from Xbox .

Microsoft only recommends using a single Xbox Wireless Controller at a time when connecting via Bluetooth.

Windows 10—Has native support for Xbox One controllers via Bluetooth starting from the Windows 10 Anniversary Update. Please see instructions from Microsoft on how to update both Windows 10 and the controller itself .

Xbox Series

Microsoft has announced that Xbox Series controllers, will work via Bluetooth . Their current compatibility information mirrors that of the Xbox One Wireless Controllers featuring Bluetooth.

The already-released Xbox Elite Wireless Series 2 controller requires updating Windows 10 to the May 2019 Update (or later) with the latest fixes and updates applied .

Nintendo Controllers

As of this writing, all Nintendo-branded wireless controllers, including controllers designed for the Nintendo Switch, map their controls using DirectInput and connect using Bluetooth Classic. Mapping controls via DirectInput causes the controllers to be incompatible with most PC games without additional software.

Wii Remote

There isn't much use for this controller outside of console emulation. The Dolphin emulator has support for the Wii Remote, but Dolphin completely takes control of the Bluetooth adapter in order to function , and will typically require a third-party sensor bar that operates without the Wii console. Because Dolphin overrides the default behavior of the adapter, we do not support this configuration.

Joy-Con

The Nintendo Joy-Cons will connect via Bluetooth without third-party software. Without using third-party software, the individual Joy-Cons connect as individual DirectInput controllers. Additionally, most features such as motion control and rumble, require third-party software.

Pro Controller

The Nintendo Switch Pro Controller will connect for basic functionality via Bluetooth without third-party software, but has poor compatibility due to controls being mapped via DirectInput. Most features such as motion control and rumble require third-party software.

For use with PC games, it is likely best to use Steam to map the controller to XInput for compatibility with most games.

8BitDo Controllers (Including GBros Wireless Adapter)

 Windows 10—Controllers from 8BitDo that feature Bluetooth connectivity, such as the SN30 Pro and SN30 Pro+ will often have the option of connecting using either XInput or DirectInput. It is recommended to use XInput with the latest updates applied to Windows 10.

In 8BitDo's documentation, they refer to this as 'X-Input' or 'Xbox 360' mode.

Steam Controller

This controller is not supported.

There are known issues with this controller with regards to reconnecting to a host using the Plugable Bluetooth adapter after the controller has been powered off. If using this controller, you must go through the pairing process each time you wish to use it when connecting through the Plugable Bluetooth adapter.

The Steam Controller is no longer in production. It can connect via Bluetooth Low Energy on Windows 8.x and above as well as Linux with the most recent firmware updates applied through Steam.

Steam is required for this controller. Instructions from Valve on how to enable Bluetooth Low Energy for the Steam Controller, and use it with Steam, can be found here .

Other Bluetooth Controllers

Check with your controller manufacturer regarding the wireless technology that is used, and whether the controller maps its inputs via DirectInput or via XInput.

We do not recommend using the Plugable Bluetooth adapter on systems that have a built-in Bluetooth adapter, or that have used a different Bluetooth adapter in the past.

Windows has a limitation where it cannot manage more than one Bluetooth adapter at a time , and it also struggles with having software for multiple Bluetooth adapters present.

Windows 10 and 11 Note

Unlike previous versions of Windows, it is not a viable option to disable a built-in Bluetooth adapter via Device Manager. Roughly every six months a major update to Windows is released by Microsoft, and when those updates are applied, it enables devices that were previously disabled in Device Manager.

The only way to reliably use the Plugable Bluetooth adapter, if your computer has a built-in Bluetooth adapter, is to disable the built-in adapter in your computer's BIOS configuration. This prevents Windows from being able to detect the hardware.

Windows 7 and 8.x Note

While it is possible to disable the built-in Bluetooth adapter via Device Manager, it is a common problem for drivers not to uninstall cleanly

Linux Note

Unlike Windows, it is technically possible to have more than one Bluetooth adapter without them conflicting with each other. However, most Bluetooth applications do not support selecting which adapter is being used.

A program called Bluetooth Manager (package name blueman), allows you to choose which Bluetooth adapter is the one you're actively configuring with regards to device pairing.

Basic Steps to Determine if You Have a Built-In Bluetooth Adapter

1. Access Device Manager

   • Windows 10—Right-click the Start Menu button, then choose 'Device Manager' from the menu that appears
   • Windows 10—Press Windows Key + X on your keyboard, then choose 'Device Manager' from the menu that appears
   • Windows 7, 8.x, and 10—Press Windows Key + R to open a 'Run' dialog prompt. In the 'Run' prompt, type devmgmt.msc then press Enter
2. Under the 'Bluetooth' or 'Bluetooth Radios' categories, evaluate the items there. For reference, the Plugable Bluetooth adapter will appear as 'Broadcom BCM20702 Bluetooth 4.0 USB Device'
   

Another option is to use PlugDebug. After your computer has run PlugDebug and generated a file on your desktop, open the .zip file and open 'devman.csv'. With that file open, search in the contents for 'BTHUSB'. Any entries including that are a Bluetooth adapter.

Basic Steps to Remove a Bluetooth Adapter

Note: It is unlikely that this will be sufficient to remove an adapter especially on Windows 10. Correctly removing all traces of an adapter are far more involved, but we document that here.

1. Right-click on the adapter in Device Manager › select 'Properties' › go to the 'Driver' tab › click 'Uninstall'
2. Check the box in the window that appears for 'Delete the driver software for this device'
3. Right-click on the adapter in the Device Manager window and select 'Disable'
4. Go to your list of installed applications and uninstall any Bluetooth-related programs

We do everything we can to indicate that the adapter should not be used on systems with an existing Bluetooth adapter, or on systems that have a previous Bluetooth adapter. Because of this, our support for complications related to this issue is limited. That being said, please reach out to us at support@plugable.com if you need assistance. When contacting us, please include a file generated by our PlugDebug software and details regarding your order of the Bluetooth adapter.

In recent versions of of iTunes, Apple has made changes that can cause disconnects in Windows 7. This fix usually solves the problem.

1. Open Explorer
   • Explorer can be opened by clicking the folder icon pinned at the bottom of the desktop near the Start button, or by opening any folder
2. Navigate to C:\Program Files\WIDCOMM\Bluetooth Software\
3. Find BtITunesPlugin.exe
4. Right-click on BtITunesPlugin.exe and select 'Rename'
5. Change the name to Old_BtITunesPlugin.exe
6. Restart your computer
7. Make sure your Bluetooth headphones, headset, or speaker is connected, then test it by playing a YouTube video through your web browser
8. If it doesn’t play, right-click the speaker icon, select 'Playback', then on the Playback tab of the Sound window, make sure the audio device is listed. If it is, right-click the icon and make sure it is selected as the default device.
9. If the audio device plays, open iTunes. If you see the error message again, please contact us at support@plugable.com. Otherwise select a long playlist and play it. You can play several playlists one after another.
10. If audio plays, let iTunes play for a while and check periodically to see if the Bluetooth audio is still working

Note: This doesn't apply to Windows 10.

Please try the following:

1. If you are running antivirus or security software, disable it temporarily during the installation
2. Press Windows Key + R, then enter services.msc in the window that appears
3. In the list of items, double-click Bluetooth Support Service
   
4. Change the startup type to Automatic and click the Start button to start the service (Check for the dependencies of this service in the 'Dependencies' tab and make sure these are also set to automatic).
5. Click 'Apply', then click 'OK'
6. Restart your PC, then try running the installer again

Wireless Technologies

Before attempting to connect a wireless mouse and keyboard, it is important to determine the wireless technology used by your mouse or keyboard.

There are multiple methods of wireless connectivity that can be used by device makers to connect wireless devices to a computer or mobile device. Some devices are able to connect by more than one method, but most will only offer one connection method. This can be a problem since most wireless connection types are not compatible with each other. We'll start by going over the different types of wireless connectivity available, then discuss how to determine what connection method is being used by your device.

Proprietary 2.4GHz Wireless

While Bluetooth has become more common in recent years, it used to be much more common for wireless mice and keyboards to use a custom wireless solution. To some extent, it is still quite common to find wireless mice and keyboards that use a manufacturer's own wireless solution.

Most non-Bluetooth wireless mice and keyboards will come with a USB adapter included that is preprogrammed to connect to the device(s) they were bundled with. This is the first sign that the device isn't using Bluetooth.

Though solutions with proprietary 2.4GHz wireless solutions are restricted to connecting to devices with USB ports where their adapter can be connected, there are some advantages to these over Bluetooth solutions. In particular, proprietary wireless keyboards and mice are essentially the same to a PC as a wired version. This allows input devices with this wireless connection method to be used within a PC's BIOS configuration menus and in other situations where Bluetooth isn't working.

It is common for users with devices that use proprietary 2.4GHz wireless solutions to misplace their USB adapter and seek a replacement. Unfortunately, the only viable solution to replace it is to seek a replacement from the original manufacturer.

For Logitech peripherals in particular, their Logitech Unifying Receiver can be configured with software provided by Logitech to connect to multiple Logitech-branded peripherals.

Bluetooth

There are two distinct variations of Bluetooth. While it isn't necessarily important to distinguish between these variations on modern Windows and Linux releases, it is important to understand the difference when using Windows 7 and earlier, as well as older Linux distributions.

Bluetooth Classic

All versions of Bluetooth and their associated profiles, up to and including Bluetooth 3.0, are considered Bluetooth Classic. Bluetooth Classic is supported on Windows XP and above, and is widely compatible across Linux distros. Bluetooth mice and keyboards with this technology use the HID (Human Interface Device) profile.

Bluetooth Low Energy/Bluetooth Smart

With the release of Bluetooth 4.0, a new type of Bluetooth connectivity was released in the form of Bluetooth Low Energy (also branded as Bluetooth Smart). As the name implies, Bluetooth Low Energy connections strive for increased energy efficiency as compared to Bluetooth Classic. This means that devices using Bluetooth Low Energy connections will generally have longer battery life than their Bluetooth Classic counterparts.

The downside of Bluetooth Low Energy is that it must be supported on hosts and devices for them to function. Newer Bluetooth mice and keyboards use the HoG (Human Interface Device over Generic Attribute Profile) profile to connect over Bluetooth Low Energy. Because Bluetooth Low Energy support was never added to Windows prior to Windows 8.x, these devices are unable to connect to systems running Windows 7 or earlier.

Determine What Wireless Technology Your Keyboard/Mouse is Using

Unfortunately there aren't many quick ways of determining what type of connection your keyboard or mouse is using. Here are some of the indications you can use to determine what technology your mouse or keyboard is using.

• Product Name
  • Products with some form of Bluetooth will usually have Bluetooth in the name, and you will usually find a Bluetooth logo somewhere on the packaging or product page
  • Products using proprietary wireless connections will often just say 'Wireless' in the product name, and you will not find Bluetooth logos on product packaging or pages
• Product Specifications
  • In the product specifications, typically found on the manufacturer's website, you can likely find details regarding the wireless connection standard used
• Product Compatibility Information
  • Bluetooth mice and keyboards using Bluetooth Low Energy will usually explicitly mention that they are not compatible with Windows 7
• Adapter/Dongle Included
  • Mouse/keyboard products that come with their own adapter are almost always using a proprietary 2.4GHz wireless connection, rather than Bluetooth
  • Mouse/keyboard products that do not include an adapter are almost always using Bluetooth Classic or Bluetooth Low Energy
• Pairing/Connect Button
  • Most non-Bluetooth mice/keyboards do not have a button for pairing or connectivity on them
  • Some non-Bluetooth Logitech mice/keyboards will have a 'Connect' button for their proprietary Logitech Unifying Receiver. However, some Logitech devices support connecting over multiple wireless standards, including the Unifying Reciever and Bluetooth
  • Bluetooth mice and keyboards will usually have a pairing button of some kind
• Bluetooth SIG (Special Interest Group) Qualified Listings
  • Devices that are properly licensed to use Bluetooth technology should appear in the Bluetooth SIG qualified listings database . If your device is listed here, the listing will indicate what version of Bluetooth is used by the device
  • Non-Bluetooth devices will not appear in the Bluetooth SIG qualified listings database

Finding Keyboard/Mouse Model Information

Most ways of determining the type of connection used for wireless connectivity require knowing the name, manufacturer, and model of the device. If you are unsure of these details, here are some ways of finding this information.

• Labels
  • Check for labels on the underside of the keyboard or mouse
  • Sometimes labels with more information can be found inside the battery compartment, if the device uses replaceable batteries
• Printed Markings
  • Check all sides of the device for printed markings
• Order Details
  • If you ordered the device online, check your purchase history to find the product page for the device
• Packaging
  • If you still have the packaging for your mouse or keyboard, check for information on the packaging
• Device Manager (Windows Only)
  • If you managed to connect your keyboard/mouse at any point to your PC, then you may be able to check Device Manager for details
    • Windows 10—Press Windows Key + X, then select Device Manager. In the device manager window, open the 'View' menu, then enable 'Show Hidden Devices'
    • Windows 10 and Lower—Press Windows Key + R, then enter devmgmt.msc in the window that appears, and press Enter. In the Device Manager window, open the 'View' menu, then enable 'Show Hidden Devices'
  • In Device Manager, check the 'Human Interface Devices', 'Mice and other pointing devices', as well as the 'Keyboards' category for your device.

If you are having problems determining the wireless connection of your keyboard or mouse, it is recommended to reach out to the device manufacturer for details. Alternatively, please reach out to us at support@plugable.com with pictures of your device, including any labels, markings, or other details that may help with identification.

Pairing

Once you've determined that your keyboard or mouse is using Bluetooth, please follow our pairing guide.

Preface

While it is technically possible to transfer files over Bluetooth, there are much better ways to exchange data between devices.

Bluetooth—without an optional and rarely used feature to work in tandem with Wi-Fi—has a theoretical maximum throughput of 3Mbps, with a practical performance closer to 1.5Mbps (192KB/s). At this rate it would take over seven minutes to transfer eight 10MB photos. Wi-Fi and USB are much better options to exchange data between hosts as their transfer rates are many times greater than that of Bluetooth.

Using fsquirt

Before continuing, it is recommended that you have your phone, or other file source, paired via Bluetooth.

Exchanging files with your phone through Bluetooth in Windows 7 and above is not straightforward, and a number of users have contacted the Plugable support team looking for an easy way to do this. Fortunately, Windows comes preinstalled with a program called 'fsquirt' that fulfills this need.

Methods of launching fsquirt:

• Windows (Any)—Press Windows Key + R then enter fsquirt in the window that appears
  
• Windows (Any)—Go to C:\Windows\System32 then launch fsquirt.exe
• Windows (Any)—Right-click on your Windows desktop, or in an empty area of a folder, then choose New › Shortcut. In the window that appears, enter fsquirt then click 'Next'. On the next step of the wizard, enter anything you'd like for the name. You'll now have a shortcut with a Bluetooth icon that launches the fsquirt application
  

Once you've launched the fsquirt application, you'll have the option to send or receive files

• Sending Files
  • Select 'Send files'
  • On the next window, a list of connected Bluetooth devices will appear. Select the device you want to send files to, then click 'Next'
  • Windows will attempt to send the file to the selected device. A message should appear on the device asking if you wish to accept the file transfer
  • Accept the transfer. When the transfer is successfully completed, you should see 'File successfully transferred' in the fsquirt window
• Receiving Files
  • Select 'Receive files'
  • The fsquirt window will display 'Waiting for a connection'
    
  • On the device you're sending files from, select the file to be transferred and follow your device's instructions for sending Bluetooth files
  • When Windows is notified of the file transfer, it will ask you where you want to store the file. Click 'OK' to receive the file

The Plugable Bluetooth adapter functions as a radio for Windows to communicate via Bluetooth. It is primarily Windows, and the Bluetooth device you're using, that are responsible for reestablishing connections.

That being said, some USB controllers on some computers will aggressively try to save power by turning off USB devices, which leads to the adapter dropping connections.

Check your power configuration (Power Options) in the Windows Control Panel (search for Control Panel in the start menu). Try disabling USB selective suspend.

In Device Manger (right-click the start menu button, then choose Device Manager), check the properties of the adapter (double-click Broadcom BCM20702 Bluetooth 4.0 USB Device) and ensure that the box for allowing the PC to turn off power is unchecked. Do the same thing for your USB root controllers. This option may not be available.

If this does not resolve the issue with your Plugable Bluetooth adapter, please contact us at support@plugable.com.

The Plugable Bluetooth adapter functions as a radio for Windows to communicate via Bluetooth. It is primarily Windows, and the Bluetooth device you're using, that are responsible for reestablishing connections.

That being said, some USB controllers on some computers do not always wake, which leads to the adapter not being initialized to reestablish Bluetooth connections.

Check your power configuration (Power Options) in the Windows Control Panel (search for Control Panel in the start menu). Try disabling USB selective suspend.

In Device Manger (right-click the start menu button, then choose Device Manager), check the properties of the adapter (double-click Broadcom BCM20702 Bluetooth 4.0 USB Device) and ensure that the box for allowing the PC to turn off power is unchecked. Do the same thing for your USB root controllers. This option may not be available.

If this does not resolve the issue with your Plugable Bluetooth adapter, please contact us at support@plugable.com.